The EpilJet provides output parameters of laser radiation earlier unattainable in a compact design. Optimisation of output parameters ensures maximum treatment speed for such class of devices that makes the EpilJet an indisputable leader in the class of compact and bargain-priced cosmetological devices.
The possibility to change output laser radiation parameters within a widest range allows to perform the most popular laser cosmetological procedures. Easy and convenient laser control and operation allow the doctor to easily select the individual treatment modes for each patient.
The laser control system provides identification of the spot size set by the doctor and automatic recalculation of the treatment parameters. Unique functions of output energy self-control and auto-calibration allow to precisely perform the treatment protocols that reduces to the minimum the risks for the patients. Thus, the EpilJet minimises hardware risks for the patient and eliminates routine actions in the doctorís work allowing him/her to concentrate on the patient and performed procedure.
Compact design, light weight and special transportation case considerably simplify the laser transportation. The original design solution of the laser eliminates the possibility to disconnect the optical fiber and handpiece for transportation. Thanks to the above advantages, you can easily move the EpilJet between different working areas.
The EpilJet design demonstrates care about the customerís budget while maintaining its competitiveness at the maximum level. The device development was initially made not only with the aim to provide moderate prices but also with the aim of reducing maintenance costs. It means that when purchasing the EpilJet you do not only pay reasonable money but also ensure considerable savings on its future service.
|Active Medium||Nd :YAG|
|Maximum pulse energy delivered to tissue, J||25|
|PRR, Hz||adjustable from 0.5 to 25|
|Maximum average output power, W||18|
|Spot Size, mm||adjustable from 4 to 20|
|Maximum Fluence, J/cm2||175|
|Beam Delivery||optical fiber Ø800 mkm ű 3.0 m|
with automatic spot size detection
|Calibration||internal calibration port|
|Laser Cooling||water-to-air heat exchanger|
|Electrical Requirements||230 V ± 10%; 50/60 Hz; 10 A; single phase|
|Dimensions, mm||580 ű 580 ű 300|
* Specifications are subject to change without notice